99 g/m²
107 microns
Permanent
NicTherm TCS/PP is a white woodfree, topcoated thermal paper with a black imaging thermosensitive coating and a polypropylene film laminated backside, for improved tear-strength, stiffness and protection against external influences.
The topcoating protects the label surface and thermally printed images against contaminants such as moisture, oil, grease and alcohol.
It can be printed with most conventional print methods, if inks and varnishes designed for direct thermal paper are used.
This thermal paper has a standard sensitivity making it suitable for print speeds up to 250mm per second depending on printer settings.
We recommend that customers assess both the pre-print and the thermal print characteristics under end use conditions before proceeding to long runs.
All data in this leaflet to be considered as typical values and are subject to change without prior notice.
The facestock is made from FSC® certified paper (FSC Mix Credit, chain-of-custody number: SAICOC-013044, Certificate Number 0175411)
This product is phenol-free.
The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs.
The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
99 ± 5 g/m²
ISO 536
107 ± 6 microns
ISO 534
General purpose, extra strong permanent adhesive with good chill characteristics.
NP500-20 has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions.
It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces.
The elevated coat-weight in NP500-20 can have a negative impact on conversion speed, as well as an increased risk of adhesive edge bleed on both labelstock and converted labels.
Rubber based hotmelt
-5 °C
-35 to 65 °C
ISEGA approved for direct contact with dry and moist non-fatty foods. Complies with FDA175.105, BfR XIV.
Not suitable for labelling highly plasticized materials, e.g. flexible PVC.
GL5 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
45 ± 3 microns
12 months stored at 20 ºC/50% RH
167 microns ± 10 microns
We are here to help!
Our order department will guide and help you with your order, inquiries or questions.
Please send us an email and we will come back to you as soon as possible.
English (UK) 