70 g/m²
78 microns
Permanent
FSC NicTherm NTC is a white, woodfree paper, with black imaging thermosensitive coating.
It is designed for short term use in relatively clean and dry environments, where there are no requirements for surface protection against contaminants or scruffing.
It can be printed with most conventional print methods, if inks and varnishes designed for direct thermal paper are used.
This thermal paper has a standard sensitivity, making it suitable for print speeds up to 250 mm/s, depending on printer settings.
We recommend customers to assess both preprint and thermal print characteristics under enduse conditions before proceeding to long runs.
All data in this leaflet to be considered as typical values and are subject to change without prior notice.
The facestock is made from FSC® certified paper (FSC Mix Credit, chain-of-custody number: SAICOC-013044, Certificate Number 0175411)
This product does not contain Bisphenol A.
The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs.
The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
70 ± 5 g/m²
ISO 536
78 ± 5 microns
ISO 534
General purpose, strong permanent adhesive with good chill characteristics.
NP500 has excellent initial tack with high bond-strength at elevated, room and chilled temperatures, as well as in moist conditions.
It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces.
NP500 provides enhanced conversion characteristics, allowing diecutting at higher speeds and is designed for both paper and synthetic face materials.
Rubber based hotmelt
-5 °C
-35 to 65 °C
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV. Approved for direct contact with dry and moist non-fatty foods.
Not suitable for labelling plasticised PVC.
GL0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
50 ± 5 microns
12 months stored at 20 ºC/50% RH
136 microns ± 10%
We are here to help!
Our order department will guide and help you with your order, inquiries or questions.
Please send us an email and we will come back to you as soon as possible.
Svenska 