70 g/m²
69 microns
Permanent
FSC NicPrint V is a smooth white, surfacesized, supercalendered woodfree printing paper, specially selected for use in both simple primary label applications and thermal transfer overprinting.
The surface is suitable for printing solids, sharp halftones and clear text including small type faces by most conventional print methods.
FSC NicPrint V may also be used as suitable media for most thermal transfer bar code label printers and print-and-apply label applicators, with suitable wax or wax/resin ribbons.
All data in this leaflet to be considered as typical values and are subject to change without prior notice.
The facestock is made from FSC® certified paper (FSC Mix Credit, chain-of-custody number: SAI-COC-013044, Certificate Number 0175411).
The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs.
The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
70 ± 3 g/m²
ISO 536
69 ± 4 microns
ISO 534
148 %
ISO 11475
General purpose permanent.
NP200 has excellent initial tack and adhesion on a wide variety of substrates, including non-polar, slightly rough and curved substrates.
Particularly good adhesion to cardboard, plastic and glass.
Rubber based hotmelt
8 °C
-10 to 70 °C
Approved for direct contact with dry and moist non-fatty foods. Complies with FDA175.105, BfR XIV.
Not advised for labelling highly plasticized materials, eg: flexible PVC.
GL5 glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
45 ± 3 microns
12 months stored at 20 ºC/50% RH
122 microns ± 10 microns
We are here to help!
Our order department will guide and help you with your order, inquiries or questions.
Please send us an email and we will come back to you as soon as possible.
English (UK) 